How to Fix System Turns on but No Display Issue?

When you switch on your system, and suddenly you see that the screen remains black. It is a very irritating issue, and many users ask to get rid of this frustrating issue. If you face a similar problem, then don’t worry, here are some suggestions to get out of this annoying problem.

Check Whether the Monitor is Switch on

In case the system switch on but screen nothing, you can look at whether the monitor is operating well. To confirm that it’s turn on, look at the power light of the monitor.

Reconnect the Monitor to the System

To reconnect the monitor to the system, pursue these guidelines given below:

1. Long press the power key until the system switches off.
2. Afterward, disconnect the video cord, which attaches the monitor to the system.
3. You should look at the port connectors over the system and the monitor.
4. Then look at view whether the video card is faulty. In case the video card is well, connect the system to the monitor again.
5. Alternatively, in case you have one more video cord available, attempt to attach the two devices through the fresh cord.
6. Now, attempt to switch on the system to view whether it should boot usually.

Disconnect the Peripherals

To disconnect the peripherals, pursue these guidelines given below:

1. At first, long-press the power key until the system switches off.
2. Thereafter, detach every peripheral such as a printer, mouse, scanner, keyboard, etc.
3. Now, attempt to switch on the system again to check the issue.
4. In the case of the system boots properly, that means one of the peripherals creates the issue. You can reinstall every device, return it to the system, and check them one by one. Now, you will locate the particular peripheral that causes the issue.

Reinstall the RAM

To reinstall the RAM, pursue these guidelines given below:

1. You have to long-press the power key until the PC turns off.
2. Then detach the cord of AC power through the power supply then launch the system case.
3. Go to the motherboard and remove the RAM within the memory slot.
4. Now, put the RAM return inside the slot.
5. Finally, attach the cable of AC power to the power socket and switch on the system.

Reset the BIOS Settings to Standard

To reset the BIOS settings to standard, pursue these guidelines given below:

1. Firstly, long-press the power key to switch the system.
2. Then detach the AC power cable and invoke the system case.
3. After that, reach the motherboard, remove the CMOS battery.
4. Now, you have to wait for some time and then put the CMOS battery again.
5. Finally, attach the cable of AC power and then switch on the system to check whether the issue continues.

Update the Device Drivers

An out of date or missing device driver should show various issues to the system, so upgrading the device drivers can always be the go-to option to stop the system from further problems.

I’m Mildred kawakami I’m a software engineer living in the United State. I am a fan of technology, photography, and web development. I’m also interested in education and writing

Visit OurSite, shootk.com

source: How to Fix System Turns on but No Display Issue?